How to make a PVC Apron

[William]

PVC_Apron.jpg

1. Firstly measure 54cm (wide) by 80cm (long) on your PVC.

2. Measure a triangle shape of 14cm across the top with a depth of 30cm, fold fabric into a triangle shape and cut with scissors. Repeat on opposite side to form an Apron shape.

3. Sew a 2cm hem around the Apron (excluding the two newly cut sides).

4. Now fold one of the newly cut sides over by 2cm and stitch, making sure that you leave either side open so that you can thread the Cotton Tape through. Repeat on opposite side.

5. Now thread the Cotton Tape through the open ends to form your Apron - as shown in the image

You will need

1. PVC of your choice. To view PVC from Abakhan, please click http://www.abakhan.co.uk/acatalog/PVC_Fabric_Table_Coverings.html.

2. 3 metres of ¾ Inco Cotton Tape. To view Cotton Tape from Abakhan, please click
http://www.abakhan.co.uk/acatalog/Cotton_Tape.html.

3. Sewing Thread. To view Sewing Thread from Abakhan, please click http://www.abakhan.co.uk/acatalog/Superstitch_500m_Thread.html.

Guidance provided by Abakhan is for informational purposes only, and we do not accept any responsibility or liability for any damage to items, or consequential losses